|Controller Type||On/Off Control|
|Operating Ambient Temp||50 DegreeC|
We have carved a niche amongst the most trusted names in this business, engaged in offering a comprehensive range of Universal Temperature Controller PID-702.
Microprocessor based controller, linearised for PT100 sensor 3 thermocouples (J,K,R) with Auto cold junction compensation.Separate displays for temperature and set point.Separate heater cooler/alarm logic relays.Offset digitally programmable from front.Configuration lockable by rear jumper.Proportional/On-Off control user selectable.User programmable hysterisis band.Percentage on time settable to avoid overshoots and save power.Non-volatile memory to save settings.Aesthetically designed front panel with membrane switch.
|Minimum Order Quantity||50 Piece|
|Controller Type||On/Off Control, PID|
|Temperature Range||0-105 Degree C|
Matching up with the ever increasing requirements of the customers, our company is engaged in providing Digital Temperature Controller.
Microprocessor based controller, K thermocouplewith Auto cold junction compensationSeparate displays for Temperature and TimingHeater relay output to control temperatureSoak Time settable from 1-999mins and activated after set temperature is reachedAlarm relay output to indicate end of soak time and any intermediate heater failureCurrent status of soak timing saved on power failureNon-volatile memory to save settingsParallel reset switch at rear for rugged usage for restarting each cycle
|Model Name/Number||Kap -013|
|Temperature Range||0 To 999 C|
|Thermocouple||R, B, S|
|Power Supply||230 Vac|
|Temperature Range||500 Degree C|
|Power||100 to 240 VAC|
Process and temperature controllers are powerful process control tools, but they offer very simple operation. Process controllers take a signal from a temperature device, such as a thermocouple or RTD, or from a pressure/ flow/ level sensor, and maintain a setpoint using an output signal.Automation direct's digital temperature controller is a single loop dual output temperature limit controller that can control both heating and cooling simultaneously.
1/32 DIN, 1/16 DIN, 1/8 DIN, or 1/4 DIN panel sizeTwo 4 character 7-segment LED displays.Accepts eleven types of thermocouples, two types of Pt100 RTD temperature sensors, and DC mA, mV, and Volt signalsFour possible control outputs relay, voltage pulse, current, and Voltage (depending on model).Up to three alarm groups, each with seventeen available alarm types.UL, CUL, and CE agency approvals.
Four types of control modes: PID, ON/OFF, Ramp / Soak and Manual.Available outputs include relay, voltage pulse, current, and linear voltage (depending upon controller model)Up to three alarm outputs available (The SL4824 series supports only one)Seventeen alarm types available in the initial setting modeAccepts thermocouple, RTD, or analog input.
|Minimum Order Quantity||5 Piece|
Strict superiority checks are been approved by us over the entire assortment, to assure that our products are faultless and are in fulfillment with the standard defined by the industry.
Rated by 5 Users